|
NEW! imax QUATTRO B6 Digital Balance Charger
four individual charging devices build in
NiCd/NiMh/Lithium/PB Batteries The imax QUATTRO B6 is an high grade balancing charger and discharger which can handle up to 6 cells and 5A on 4 different independent chargers.
The QUATTRO B6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the QUATTRO B6 is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fans avoide overheating in fast charging mode. The QUATTRO B6 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-15V DC
- Individual connection cable for most RC-usage
- Balancer connector pannels : XH, FH
 Quattro B6 charger offers a complete charging solution for novice and expert RC enthusiasts alike. The multi-tasking versatility of this new charger makes it a perfect fit for nitro and electric modelers, regardless of what you drive, hover, float or fly.
Optimized operating software iMAX Quattro B6 features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users! Internal independent lithium battery balancer iMAX Quattro B6 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging. Balancing individual cells battery discharging During the process of discharging, iMAX Quattro B6 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal. Adaptable to various type of lithium battery IMAX Quattro B6 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Processing time limit: You can also limit the maximum process time to avoid any possible defect.
Data store/load The maximum five batteries' data can be stored for users' convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting. Cyclic charging/discharging 1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and balancing to stimulate the battery's activity. Fast and storage mode of lithium battery Purposes to charge Lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery. Maximum safety Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically. Automatic charging current limit You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode. Capacity limit The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value. Temperature threshold* The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. * This function is available by connecting optional temperature probe, which is not included in the package. PC based analysis uing USB Communication iMAX Quttro B6 offer PC based program can analysis the characteristic of the battery via USB port. It shows a graph of voltage, current, capacity curves. It also shows the individual voltage of each cell in the Lithium battery pack. PC-LINK USB adaptor can be purchased separately  
|
Safety shopping
Environment
